Home > News > Industry News > Precautions for transporting tempered glass.
Industry News
Company News
Contact Us
Contact Now

Precautions for transporting tempered glass.

Precautions for transporting tempered glass.

Jimyglass Original translation 2016-11-24 15:50:39

Glass is a fragile item, even if the tempered glass is called hard glass, improper transport is also very easy to break. Therefore, in the transport project must pay attention to fixed and soft pad, generally recommend the use of erect method of transport.

If transportation is no problem, then the most critical step: the installation problem. If the other side of the tempered glass installation is closed, pay attention to clean the surface before installation, it is best to use a dedicated glass cleaner, and to be dry and confirmed that after the absence of contaminants After the installation, installation is best to use clean construction gloves, fixed when using silicone sealant. If it is the installation of windows, but also with the rubber seal with the use of such.

Performance: thermal stability

Since January 1, 2004 implementation of the "construction safety glass regulations," the provisions of the bathroom fence and screen must use safety glass. Safety glass is a kind of violent shock or impact is not broken, even if broken is not easy to hurt the glass. Common types of safety glass is coating glass, tempered glass, laminated glass.

Tempered glass is also called hardened glass.Toughened glass thermal stability, and can adapt to frequent changes in the temperature difference between the bathroom, the debris on the human harm is also small.However, if the quality is not up to standard, improper installation, maintenance and other issues are not in place, tempered glass also have security risks.

Installation: cutting easily lead to blew 

Some of the shower on the market today, many of the use of toughened glass or semi-tempered glass for ordinary thickening. These stones in the glass, more impurities, the quality varies greatly.

In addition, improper installation may also cause the glass blew. For example, the installation of a certain degree of tilt glass or artificially change the shape of the glass. In the installation of the most bogey cutting glass, because tempered glass can not be in the steel after the size and shape processing, which is very easy to make the glass blew. In the purchase of products, it is best to require manufacturers to provide professional home installation.

The middle part of the tempered glass is the most solid,corners and edges are the weakest. So pay attention to protect the corner of the glass position, regularly check whether the corner cracks. In addition the owners can buy explosion-proof membrane paste just in case.

Jimy Glass Company produces high-quality flat tempered glass and curved tempered glass, used in a variety of exhibition halls, office buildings, shopping malls and hotels and other superior quality buildings.

Flat tempered glass specification:
Size: Maximum 3000*8000mm, Minimum 150*300mm
Thickness: 3mm 4mm 5mm 6mm 8mm 10mm 12mm 15mm 19mm
Color: clear, ultra clear, green, blue, grey, bronze, etc.
Type: Clear, Tinted, Reflective, Low Iron, Etched, Textured, color painted, pattern screen printing, Colorsmart, Thermocolour and Low E glass, etc.
Processing: All the processing like beveling, cutting, drilling, etc. must be done before tempering.

Curved tempered glass specification:
Thickness: 5mm 6mm 8mm 10mm 12mm 15mm 19mm
The cuved tempered glass radius of 800-5000mm, Arc length of 500mm -3000mm
Radius less than 700mm, the glass size of 1600x2400mm
Radius above 1000mm, the glass size of 2400x 4800mm
Holes: The tempered glass hole diameter at least sam as the glass thickness
Color: clear, ultra clear, blue, bronze, grey, green,
Type: Single or laminated or insulated clear, tinted, reflective, acid etched, screen printing, low e glass, etc.

Welcome to visit the factory and friendly cooperation!

safety tempered glass package