Home > News > Industry News > The common decoration glass ty.....
Hot Product
Certifications
Contact us
SHENZHEN JIMY GLASS CO., LIMITED 3F, QIHANG BUSINESS BUILDING, SHENFENG ROAD, LIUYUE, HENGGANG, SHENZHEN, CHINA TEL: 0086 755 28211334 / 0086 755 8934...
Contact Now

News

The common decoration glass type, specifications and usage

  • Author:SHENZHEN JIMY GLASS CO.LTD
  • Source:original
  • Release on :2016-12-01


Glass simple classification is divided into flat glass and special glass, while the special glass is a large variety, the following according to common decoration varieties to explain as follow:

A ) Normal flat glass 
2mm 3mm flat glass, mainly used picture frame glass or screen glass,etc
4mm 5mm 6mm flat glass, mainly use on window, louver, and small area which need light transmitting
8mm 10mm 12mm flat glass, normally use on door, large area partition, balustrade,etc
15mm, 19mm flat glass less producing by the market, have to been booking, mainly used on double-open floor glass door and whole outer wall,etc

B) Special glass

1. Tempered glass, is made by normal flat glass, compare with normal flat glass has two advance characteristics:
a. Tempered glass is more stronger of 4-5 times, impact resistance above 5times than normal flat glass 
b, tempered glass no easy to broken, even been broken, is on small particle, no sharp to hurt human.

2.Frosted glass, is also made by the normal flat glass, normally thickness under of 12mm, for 5mm,6mm is more popular by the market.

3. Sandblasting glass, the performance similar of frosted glass, the different is one is frosted, another is sand blast, the frosted glass surface is smooth, the sandblasting glass on rough surface,they are looks similar by view, most of people thought them are same.

4. Pattern glass, is a kind of decorative translucent flat glass with embossed patterns on one or both surfaces, the most important character is pervious to light but is opaque

5. Wired glass, laminated with wired or wire mesh, with stronger impact resistance, when been impacting, is form a radial crack not drop off to hurt human,mainly use on High-rise buildings and the workshop] building under the powerful concussive.

6. Insulated glass, commonly consists of two (sometimes more) panels of glass separated by an aluminum spacer and sealed together at the edge. The insulating airspace is filled with dry air or a noble gas, such as argon or krypton inside to slow the heat exchange and reduce noise levels. Mainly use on the requirement for sound insulation decoration project.

7. Laminated glass, is made up of two or more layers of glass permanently bonded together with an interlayer (PVB / SGP / EVA) via a controlled, highly pressurized and industrial heating process. The lamination process results in the glass panels holding together in the event of breakage, reducing the risk of harm. Mainly use on required safety decorative project.

8. Bullet-proof glass, actually is one type of laminated glass, but the composition of the glass and more use of high strength tempered glass, more used in banks or luxury and  some decoration project required high security requirements.

9. Hot bent glass, through the flat glass been heating softening in the mold in the shape, and then made by annealing the curved glass. More use on high-level decoration and display case, need to book as per required.


ornamental glass